Model 7460 is a concrete-deck scale for weighing highway vehicles. The driving surface is 8-inch thick concrete with a modular steel framework. This composite concrete/steel design provides a very durable scale with concrete in compression and steel in tension. Factory-assembled modules eliminate field welding, simplifying installation. Foundation options: floating beam slab, variable footer, pit. Analog load cells provide accurate, reliable weighing.

Model 7461 is a steel-deck scale for weighing over-the-road vehicles. This ´Commercial Duty´ truck scale is ideal for applications with low-to-moderate traffic. It delivers proven performance at an affordable price. The modules are factory assembled and easy to install or move. Orthotropic ribs add torsional rigidity for off-center loading. Standard foundation: variable footer. Analog or DigiTOL load cells provide accurate, reliable weighing.

Model 7531 is a concrete-deck scale for weighing highway vehicles. It is designed for above-ground installation. Driving surface is reinforced concrete (8 inches thick) with a modular steel framework. Steel I-beam framework is assembled on site and provides a built-in side rail for safety. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

7541 Truckmate®

Model 7560 is a concrete-deck scale for weighing highway vehicles. The driving surface is 8-inch thick concrete with a modular steel framework. This composite concrete/steel design provides a very durable scale with concrete in compression and steel in tension. Factory-assembled modules eliminate field welding, simplifying installation. Foundation options: floating beam slab, variable footer, pit. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

Model VTC210 is our strongest concrete-deck truck scale. It combines a concrete driving surface with the same type of orthotropic steel understructure that is used for our steel-deck scales. The orthotropic design provides exceptional durability by distributing concentrated loads over a large surface area. Factory-assembled modules eliminate field welding, simplifying installation. Foundation options: floating beam slab, variable footer, pit. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

Model 7562 is a steel-deck scale for weighing over-the-road vehicles. This ´Cycle Duty´ all-steel truck scale is ideal for high-use applications. Its modules are factory assembled and easy to install or move. Orthotropic ribs add torsional rigidity for off-center loading. Foundation options: floating beam slab, adjustable footer, pit. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

Model 7566 is a steel-deck scale for weighing off-road vehicles used in mining, steel, aggregate, forestry, and other operations. This rugged scale is built to provide dependable performance for extreme duty cycles. It is available as a single-width scale (11 feet 10 inches wide) or a double-width scale capable of handling the largest off-road vehicles. MTX load cells provide accurate, reliable weighing over a long service life.

Model 760DC is a complete kit for converting a vehicle scale for fully electronic operation. This system of DigiTOL load cells can be installed under an existing weighbridge. It replaces costly analog load cells or high-maintenance mechanical lever systems. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

  MSI

Each weigh pad is sealed from environmental influences and provides 10 tons of loading capacity. Integral loading ramps and a nonskid base provide safe and easy vehicle loading on virtually any type of surface including dirt, concrete, asphalt or gravel.

Load Ranger's self-contained digital display provides easy operator viewing of weights to the nearest 20 or 50 pound increments at an accuracy of 1.0%. Push-button controls for On/Off and Zero make operation simple with continuous use up to 40 hours. An external battery charger (110/230 VAC and 12 VDC) is provided to recharge batteries conventionally or from vehicle power.

The Load Ranger is tested and approved to NTEP Class IV standards.

  Intercomp

Intercomp's low profile, portable axle scale gives you the accuracy to weigh most any over the road vehicle. Its ultra lightweight design (only 400 lbs. per platform) makes this portable scale easy to set up. Each scale system comes complete with high strength aluminum ramps and Intercomp's PT20 Axle Weigher indicator. This digital battery operated indicator has a built-in charger, printer, jumbo sized display, memory and numerous other standard features.